DIY Car Care Quick Tips for Every Car Owner

Welcome to TNT Customs DIY Car Care 101! Knowing the basics of car care can go a long way. In this beginner-friendly guide, we’ll cover essential tasks that anyone can perform to keep their car running smoothly and safely.

Checking Fluid Levels:

• Pop the hood and locate the engine oil dipstick. Make sure the engine is not running.
• Pull out the dipstick, wipe it clean, reinsert it, and pull it out again to check the oil level.
• Check the coolant level in the transparent reservoir near the radiator.
• Look for the windshield washer fluid reservoir and ensure it’s topped up.
• Don’t forget to inspect the brake fluid level in its designated reservoir.

Changing Wiper Blades:

• Lift the wiper arm away from the windshield.
• Press the tab or button on the wiper blade to release it from the arm.
• Attach the new wiper blade by following the instructions provided.
• Ensure the blade is securely in place before lowering the wiper arm back down.

Maintaining Tire Pressure:

• Use a tire pressure gauge to check the pressure in each tire, including the spare.
• Refer to your vehicle’s manual or the sticker inside the driver’s door for the recommended tire pressure.
• Add or release air as needed to match the recommended pressure.
• Don’t forget to check tire pressure when the tires are cold for accurate readings.

Inspecting and Changing Air Filters:

• Locate the air filter housing under the hood.
• Open the housing and inspect the air filter for dirt and debris.
• If the filter looks dirty, replace it with a new one.
• Make sure the new filter is installed properly and the housing is securely closed.

Checking and Changing Engine Belts:

• Inspect the condition of the engine belts for cracks, fraying, or signs of wear.
• Refer to your car’s manual to locate the belts and identify the type of belt you have.
• If you notice any damage, consider replacing the belt(s) to prevent breakdowns.

Inspecting Lights and Signals:

• Turn on your headlights, taillights, brake lights, and turn signals.
• Walk around the car to check that all lights are working properly.
• Replace any bulbs that are burnt out or dim.

Keeping Your Car Clean:

• Regularly wash your car to remove dirt, grime, and salt buildup.
• Use car-specific soap and a soft sponge or microfiber cloth to avoid scratching the paint.
• Don’t forget to clean the interior, including vacuuming carpets and wiping down surfaces.

By following these simple DIY Car Care tips, you can keep your car in top condition and avoid costly repairs down the road. Remember, regular maintenance is key to ensuring your vehicle stays safe and reliable for years to come. Happy DIY car caring!